SteadyTyping

All tools

Mic test

A live level meter for your microphone, kept on your device

Press Start and allow the microphone when your browser asks. Speak or clap: if the bar moves, sound is reaching your browser. Press Stop when you are done.

Nothing is switched on. Press Start and your browser will ask for permission.

Speak, clap or tap near the microphone: the bar should jump.

–

Microphone
–
Level now
–
Loudest so far
–
Sample rate
–
Channels
–
Sound heard
–

What happens when you press Start

The page asks your browser for the microphone. Your browser then asks you; nothing is switched on before you agree. The sound goes only to a level meter inside this page. It is not recorded, not played back through your speakers, not stored and not sent anywhere. Press Stop and the page releases the microphone; it also lets go when you switch to another tab or leave the page.

Reading the meter

The bar shows the level in decibels below full scale (dBFS), from silence at the left to the loudest the system can record, 0 dBFS, at the right. The dark mark shows the loudest moment so far. Sound heard turns to Yes once the peak level rises above −50 dBFS, which a word or a clap near the microphone easily passes. The figures come from the browser's own audio tools, so they are a check that sound arrives, not a calibrated sound level.

If the bar does not move

Sample rate and channels

These are what your browser reports for the microphone, often 44,100 or 48,000 Hz and one channel. Some browsers do not report the channel count.

Related tools